Garmin G600 manual Terrain-SVT Page Aviation Data, Inhibiting/Enabling Terrain-SVT Alerting

4.6.2Terrain-SVT Page Aviation Data

Select the display of Aviation data on the Terrain-SVT page. The Page Menu selections allow you to hide or show aviation data overlay on the Terrain or the Map Setup options for the Navigation Map pages.

1)While viewing the Terrain page of the MAP page group, press MENU for Map selections to hide or show aviation data overlay on the Terrain or the Map Setup options for the Navigation Map pages.

Figure 4-25 Show/Hide Aviation Data on the Terrain-SVT Page

2) Press ENT to save the highlighted value.

4.6.3Inhibiting/Enabling Terrain-SVT Alerting

Terrain-SVT has an inhibit mode that deactivates the PDA/FLTA aural and visual alerts. Pilots should use discretion when inhibiting Terrain-SVT and always remember to enable the system when appropriate.

Figure 4-26 Terrain-SVT Alerting Disabled (Alerts Inhibited) Annunciation (PFD & MFD)

1)In MAP page group, turn the small MFD knob to reach the Terrain SVT Page.

2)Press the INHIBIT soft key to inhibit or enable Terrain SVT (choice dependent on current state).

OR

1) Press the MENU key.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Sec 4 Hazard Avoidance
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 4-29