Garmin G600 manual PFD Bezel Keys, Heading HDG

1.4.1.2PFD Bezel Keys

Heading (HDG)

Selects Heading Select mode. Pressing the PFD knob in Heading mode will center the Heading Bug on the current Heading. This is the default mode for the PFD knob. Set the heading on the HSI by turning the PFD knob after pressing the HDG key.

Course (CRS)

Selects Course Select mode. Pressing the PFD knob in Course mode will center the CDI for a VOR or OBS mode course.

Altimeter (ALT)

Selects Altitude Select mode. Pressing the PFD knob in Altitude Select mode will enter the current altitude in the Altitude Select window. Set the Altitude Bug by turning the PFD knob after pressing the ALT key.

Altitude Select Window

Altitude Bug

Current Altitude

Barometric Setting

Figure 1-16 Pressing PFD Knob Sets Altitude Select to Current Altitude

Foreword
Sec 1 System
PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 1-15