Foreword

Runway Information Selection

Information is provided for each runway showing the following detail: runway number, runway length, surface type, and the frequency for Pilot-Controlled Lighting (PCL).

Sec 1

System

2

 

Runway Number

Runway Length

& Width

Pilot-Controlled

Lighting Frequency

Arrow Indicates

More Runways

Runway Surface

 

Sec PFD

 

Sec 3 MFD

Sec 4

Hazard Avoidance

Sec 5

Additional

Features

Sec 6

Annun. & Alerts

 

Sec 7

Symbols

 

Sec 8

Glossary

 

 

Appendix A

 

Appendix B

Index

Figure 3-119 Waypoint Runway Information

1)While viewing the Waypoint Information page of the FPL page group, press the RWY/FREQ soft key to view information about the waypoint and press the small MFD knob to activate the cursor.

2)Use the large MFD knob to highlight the Runway and use the small MFD knob to display the available runways.

3)Press the small MFD knob to cancel editing.

Facility Frequency Selection

The Frequency window at the bottom of the Waypoint Information page shows the frequencies available for the selected waypoint. A scroll bar is shown on the right side of the Frequency window if more frequencies are available.

Figure 3-120 Waypoint Frequency Information

1)While viewing the Waypoint Information page of the FPL page group, press the RWY/FREQ soft key to view information about the waypoint and then press the small MFD knob to activate the cursor.

2)Turn the small MFD knob to scroll through the available frequencies.

3)Press the small MFD knob to exit.

3-84

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 154
Image 154
Garmin G600 manual Press the small MFD knob to exit, Runway Information Selection, Facility Frequency Selection