FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call
Troubleshooting Guide
This guide is intended to assist you in determining why the laser is not |
| |
operating to your expectations. These are some of the most com- | English | |
monly asked questions or observances. If you still have questions or | ||
problems with your DEWALT laser after completely reading through | ||
| ||
this Troubleshooting Guide and instruction manual, call our toll free |
| |
Hot Line at |
| |
THE LASER WILL NOT TURN ON. |
| |
Ensure that fresh batteries are properly inserted into the tool. TIP: See |
| |
“Installing the Batteries” section. Rotate the ON/OFF VARIABLE |
| |
SPEED Knob clockwise to turn the power on. TIP: See “Control |
| |
Panel” section. If the laser still doesn't turn on, take the tool to a |
| |
DEWALT service center. |
| |
THE LASER TURNS SLOWLY OR HAS TROUBLE ROTATING. |
| |
Freezing temperatures adversely effect the performance of batteries. |
| |
Therefore the laser and batteries should not be stored in freezing con- |
| |
ditions. If the tool has been stored in extremely cold conditions, run- |
| |
ning the laser for a few minutes will bring the unit up to proper work- |
| |
ing temperature. |
| |
AFTER TURNING THE LASER ON, 2 LASER DOTS ARE |
| |
PROJECTED FROM THE ROTARY HEAD. |
| |
The DW071 Rotary Laser has been designed with dual, side by side |
| |
laser diodes. Two diodes allows the laser to avoid blind spots which |
| |
could potentially be created by the protective cap over the rotary head |
| |
and also produce an extremely bright beam when the rotary laser |
| |
head is spinning. |
|
11
