English
•Compare the vertical position of the center of each laser beam. The centers should be within 3/32" (vertically) of each other.
•If the centers of the two beams differ by more than 3/32" (vertically), then have your Rotary Laser calibrated at a DEWALT service center.
PLUMB ERROR CHECK
•Set up a tripod about 25' from a vertical surface.
•Mount your Rotary Laser on the tripod.
•Following the procedure in the “Two Position Pivoting Head” section of this manual, set the Rotary Laser head in the plumb position.
•Hang a plumb bob on the surface.
•Level the laser, following instructions in the “Vertical Plumbing” sec- tion of this manual.
•Turn the unit on so that the lasers are on and rotating.
•Rotate the laser on the tripod so that the beam is in the line with the plumb bob.
•Ensure that the laser is still level.
•If the beam lies along the same line as the plumb bob, then the cal- ibration is acceptable.
•If the beam does not lie along the same line as the plumb bob, have your Rotary Laser calibrated at a DEWALT service center.
Accessories
Recommended accessories for use with your tool are available for purchase at your local service center.
CAUTION: The use of any
If you need any assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 or call
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments should be performed by certified service centers or other qualified service organizations, always using identical replace- ment parts.
Three Year Limited Warranty
DEWALT will repair, without charge, any defects due to faulty materi- als or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair informa- tion, visit www.dewalt.com or call
In addition to the warranty, DEWALT tools are covered by our:
1 YEAR FREE SERVICE
DEWALT will maintain the tool and replace worn parts caused by nor- mal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specif- ic warranty information contained either in the packaging, call the local company or see website for warranty information.
10
