5.1.2Choosing a Chart for the Current Airport

 

 

Foreword

 

Sec 1

System

 

Sec 2

PFD

 

Sec 3

MFD

Sec 4

Hazard

Avoidance

Sec 5

Additional

Features

NOTE: The chart for the destination airport or loaded approach will automatically be selected.

1)While viewing the Charts page of the FPL page group, press the SELECT soft key to activate chart selection.

2)Turn the large MFD knob to highlight the field to the right of the airport identifier.

3)Turn the small MFD knob to highlight the desired chart.

Sec 6 Annun. & Alerts

Sec 7

Symbols

Sec 8

Glossary

 

Appendix A

Appendix B

Index

Figure 5-4 Activate Chart Selection for the Current Airport (ChartView shown)

5-4

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 290
Image 290
Garmin G600 manual Choosing a Chart for the Current Airport