Garmin G600 manual Measuring Distances, Press the small MFD knob to stop measuring

		Foreword
	Sec 1	System
	Sec 2	PFD
	Sec 3 MFD
Sec 4	Hazard Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

3.3.8Measuring Distances

The “Measure Bearing/Distance” function provides a quick and easy method to determine the bearing and distance between any two points on the Navigation Map.

1)While viewing one of the Navigation Map pages of the Map page group, press

MENU.

2)Turn the large or small MFD knobs to highlight “Measure Bearing/ Distance“ and then press ENT.

Figure 3-10 Navigation Map Measure Distance Function

3)Your present position will be marked as the starting reference point.To choose a different starting reference point, turn the large or small MFD knobs to desired point and press ENT.

Figure 3-11 Measure Distance Starting Reference Point

4)Turn the large or small MFD knobs to move the cursor to a reference point. The distance and bearing is displayed at the top of the display.

Distance and Bearing Between Start and End Points

Ending Reference

Point position

Ending Reference Point

Starting Reference Point

Figure 3-12 Bearing/Distance Measurement

5) Press the small MFD knob to stop measuring.

3-10 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E