TFR Viewing Range (optional)

The Temporary Flight Restriction (TFR) viewing range option selects whether TFR information is shown on the Navigation Map. TFR information will be shown at and below the selected map range. When Off is selected, the information will not be shown. In the example below where 500 NM is selected, TFR information will be shown at map ranges of 500 NM and lower. This optional feature requires an active data link receiver.

Figure 3-62 Navigation Map TFR Viewing Range Selection

1)While viewing the Navigation Map Setup page and the Aviation Group is active, turn the large MFD knob to highlight the “TFR” option.

2)Turn the small MFD knob to change the highlighted value.

3)Press ENT to accept the displayed value.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to another option.

Foreword

 

 

System

Sec 1

 

PFD

Sec 2

 

Sec 3 MFD

 

Avoidance

Hazard

Sec 4

Features

Additional

Sec 5

& Alerts

Annun.

Sec 6

Symbols

Sec 7

 

Glossary

Sec 8

 

Appendix A

 

 

Index

Appendix

 

 

B

 

190-00601-02 Rev. E

Garmin G600 Pilot’s Guide

3-47

Page 117
Image 117
Garmin G600 manual TFR Viewing Range optional, Navigation Map TFR Viewing Range Selection