Garmin G600 manual Changing CDI Sources, Navigator

		Foreword
	Sec 1	System
	Sec 2 PFD
	Sec 3	MFD
Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

NOTE: The ILS Localizer and Glideslope deviation indicators will indicate full-scale deflection for the GNS 480 navigator at the second dot. The GNS 400W/500W series navigators will indicate full-scale deflection at the edge of the display.

2.7.1Changing CDI Sources

The CDI can display two sources of navigation: GPS or NAV (VOR, and LOC). Color indicates the current navigation source: magenta (for GPS) or green (for VOR and LOC). The full-scale limits for the CDI are defined by a GPS-derived distance when coupled to GPS. When coupled to a VOR or localizer (LOC), the CDI has the same angular limits as a mechanical CDI. If the CDI exceeds the maximum deviation on the scale (two dots) while coupled to GPS, the crosstrack error (XTK) is displayed below the white aircraft symbol.

GPS	VLOC
Navigator 1	Navigator 1

GPS	VLOC
Navigator 2	Navigator 2

Figure 2-29 CDI Navigation Sources

2-22 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E