Garmin G600 manual Turn the small MFD knob to select the reporting frequency, Send Soft Key Label

1)Turn the large MFD knob to reach the Aux page group. Turn the small MFD knob to reach the Position Reporting page.

2)Press the small MFD knob to select the Report Type.

3)Turn the small MFD knob to highlight Standard and then press the ENT key.

Figure 3-90 Select Standard Reporting

4)The Position Reporting Period type will now be selected. Turn the small MFD knob to highlight "Off" or "Automatic" and then press the ENT key. The Position Reporting Period interval will now be selected.

5)Turn the small MFD knob to select the reporting frequency.

Figure 3-91 Select Standard Reporting Period Frequency

6)Press the small MFD knob to exit editing.

7)With the Standard Reporting Type, the reporting period may be manually overridden by pressing the SEND soft key to send data.

SEND Soft Key Label

SEND Soft Key

Figure 3-92 Press SEND to Override the Reporting Period

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 3-67