Garmin G600 manual Cloud Top Data Viewing Range, Cloud Top Viewing Range Selection

MFD PFD System Foreword

Sec 3 Sec 2 Sec 1

Cloud Top Data Viewing Range

The Cloud Top Data Viewing Range option allows you to select the map range where at and below that value Cloud Top weather products will be shown on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, Cloud Tops will not be shown. In the figure below where 150 NM is selected, Cloud Top data will be shown at map ranges of 150 NM and lower.

Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7 Symbols
	Sec 8 Glossary
		Appendix A
	Appendix B	Index

Figure 4-43 Cloud Top Viewing Range Selection

1)While viewing a WX Data Link Map page of the WX page group, press the MENU key to display the Page Menu Options. The cursor flashes on the “Weather Setup” option. Press ENT.

2)Turn the large MFD knob to highlight the Cloud Top Data Viewing Range value.

3)Turn the small MFD knob to highlight the desired value. Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

4-62 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E