Garmin G600 manual Effectivity, System is verifying chart, Installed for the first time

		Foreword
	Sec 1	System
	Sec 2	PFD
	Sec 3	MFD
Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary
		Appendix A
	Appendix B	Index

Power-up Page Display	Definition
	System time is not available.
	GPS satellite data is unknown
	or the GPS navigator has not
	yet locked onto satellites. Check
	database cycle number for
	effectivity.
	System is verifying chart
	database when new cycle is
	installed for the first time.
	After verifying, chart database is
	found to be corrupt. ChartView
	will not be available.

Table 5-1 Power-up Page Annunciations and Definitions

The ChartView time critical information can also be found on the AUX - System Status page. The database CYCLE number, EXPIRES, and DISABLES dates of the ChartView database appear in either blue or yellow text. When the ChartView EXPIRES date is reached, ChartView becomes inoperative 70 days later. This is shown as the DISABLES date. When the DISABLES date is reached, charts are no longer available for viewing.

Select the DBASE soft key for scrolling through the database information. Scroll through the database with the MFD knob or ENT key.

The ChartView database is provided directly from Jeppesen. ChartView is an optional feature that requires enablement by a Garmin dealer. Refer to Jeppesen Databases in Appendix A for instructions on revising the ChartView database.

5-12 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E