4)Turn the small MFD knob to select the desired data item and press ENT.

5)Press the small MFD knob to remove the cursor.

To restore factory default settings for data fields on the Active Flight Plan Page:

Foreword

1)While viewing the Active Flight Plan Page of the FPL page group, press MENU to display the Active Flight Plan Page Options window.

2)Turn the large MFD knob to highlight “Restore Defaults?” and then press ENT.

Figure 3-111 Active Flight Plan Page Menu Option Selection to Restore Defaults

3.5.1.3Setting the Altitude Minimums Alerter

The Altitude Alerting function provides the pilot with visual and aural alerts (if interfaced to an audio panel) when approaching the Selected Altitude. Whenever the Selected Altitude is changed, the Altitude Alerter is reset. The Altitude Alerter is independent of any autopilot installed in the aircraft. See the Altitude Alerting section of the PFD section for more details.

1)While viewing the Charts Page of the FPL page group, press the Menu key. With the Set Minimums item highlighted, press ENT.

2)With the Minimums Source highlighted, select the Altitude Minimums Alerter source with small MFD knob.

Figure 3-112 Minimums Source Selection

3)Turn the large MFD knob to highlight the Altitude Minimums value. Turn the large and small MFD knobs to change the Altitude Minimums value.

Figure 3-113 Minimums Altitude Selection

190-00601-02 Rev. E

Garmin G600 Pilot’s Guide

3-79

System

Sec 1

 

PFD

Sec 2

 

Sec 3 MFD

 

Avoidance

Hazard

Sec 4

Features

Additional

Sec 5

& Alerts

Annun.

Sec 6

Symbols

Sec 7

 

Glossary

Sec 8

 

Appendix A

 

 

Index

Appendix

 

 

B

 

Page 149
Image 149
Garmin G600 manual Press the small MFD knob to remove the cursor, Setting the Altitude Minimums Alerter