Garmin G600 manual Ident/Facility/City Selection, Facility Name

Ident/Facility/City Selection

The current destination Identifier, Facility Type with icon, Facility Name, and City (location) are shown in the top window of the Flight Plan mode Waypoint Information page. The default is the Nearest airport if there is no active flight plan. New Identifiers may also be selected as shown in section 3.5.3.3.

Identifier	Access (Public/
		Private and
Facility Name		Symbol)
City

Figure 3-118 Flight Plan Ident/Facility/City Detail

1)While viewing the Waypoint Information page of the FPL page group, press the RWY/FREQ, APT DIR, or WX soft keys to view information about the waypoint.

2)The current destination Ident, Facility, and City is shown, but may be changed to find information about other choices. Press the small MFD knob to activate the cursor. These fields may not be selected if the RWY, APT DIR, or WX pages are selected. If viewing those pages, press the soft key for that page again to return to the Waypoint Information page.

3)Use the large MFD knob to highlight the field you wish to change and use the small MFD knob to change the value.

4)Press the ENT key to save the selected value or press the small MFD knob to cancel editing.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 3-83