Garmin G600 Turn the small MFD knob to select the value and press ENT, PFD Options Wind Vector

1)While viewing the System Setup page of the AUX page group, press the small MFD knob to activate the cursor. Turn the large MFD knob to highlight the desired Airspeeds value.

2)Turn the small MFD knob to select the value and press ENT.

Foreword

3)The On/Off setting will now be highlighted. Turn the small MFD knob to select On or Off and press ENT. The next value will be highlighted.

Sec 1 System

3.4.1.3PFD Options - Wind Vector

When selected, wind vector information is displayed on the PFD to the left of the HSI. Four styles are available.

1)While viewing the System Setup page of the AUX page group, press the small MFD knob to activate the cursor. Turn the large MFD knob to highlight the desired Wind Vector value.

2)Turn the small MFD knob to select the style and press ENT.

Style 1 Style 2 Style 3 Style 4

Figure 3-71 Wind Vector Style

3)When a Wind Vector style is selected, a Wind Vector box with the chosen style will be displayed to the left of the HSI on the PFD. When OFF is selected, the Wind Vector box will not be displayed.

PFD	Sec 2
Sec 3 MFD
Avoidance	Hazard	Sec 4
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 3-53