Garmin G600 manual Weather Page Map Orientation, Nexrad Data Viewing Range

4.9.6Weather Page Map Orientation

The Orientation option sets the orientation of the Wx Data Link Map pages.

1)While viewing the Wx Data Link Map 1, 2, or 3 of the Wx page group, press the MENU key. With “Weather Setup” highlighted, press ENT.

2)With the “Map Orientation” option active, turn the small MFD knob to change the highlighted value.

Figure 4-37 Weather Page Map Orientation

3)Press ENT to accept the displayed value. The next option will be highlighted.

4)Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option.

4.9.7NEXRAD Data Viewing Range

The NEXRAD Viewing Range option allows you to select the map range where at and below the selected value NEXRAD weather products will be shown on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, NEXRAD weather data will not be shown. In the figure below where 300 NM is selected, NEXRAD data will be shown at map ranges of 300 NM and lower.

Figure 4-38 NEXRAD Viewing Range Selection

1)While viewing a WX Data Link Map page of the WX page group, press the MENU key to display the Page Menu Options. The cursor flashes on the “Weather Setup” option. Press ENT.

Foreword
System	Sec 1
PFD	Sec 2
Sec 3 MFD
Sec 4 Hazard Avoidance
Features	Additional	Sec 5
& Alerts	Annun.	Sec 6
Symbols	Sec 7
Glossary	Sec 8
Appendix A
Index	Appendix
	B

190-00601-02 Rev. E Garmin G600 Pilot’s Guide 4-57