System Foreword

Sec 1

Figure 3-76 Altitude and Vertical Speed MFD Display Units

Avoidance MFD PFD

Hazard Sec 3 Sec 2

Sec 4

3.4.1.7System Display Units

The System Display Units options allows the selection of units to display values for Navigation Angle (Magnetic or True), Barometric Setting (inches or Hectopascals), and Temperature (Fahrenheit or Celsius). Pressing the DFLT UNIT soft key will restore the Default Unit settings.

1)While viewing the System Setup page of the AUX page group, press the small MFD knob to activate the cursor. Turn the large MFD knob to highlight the System Display Units selection titled “Nav Angle.”

Sec 5

Additional

Features

Sec 6

Annun. & Alerts

 

Sec 7

Symbols

CAUTION: The Nav Angle display units (Magnetic or True) must be set to the same type in both the GDU 620 and GNS navigators.

Figure 3-77 Nav Angle System Display Units

Sec 8

Glossary

 

Appendix A

Appendix B

Index

2)Turn the small MFD knob to select Magnetic or True and then press ENT. The Barometric Pressure Setting value will now be highlighted. When True is selected, a "T" will appear to the right of the heading value on the PFD.

Figure 3-78 Barometric Setting System Display Units

3-58

Garmin G600 Pilot’s Guide

190-00601-02 Rev. E

Page 128
Image 128
Garmin G600 manual System Display Units, Altitude and Vertical Speed MFD Display Units