Garmin G600 manual GPS Level, Service, Bearing

		Foreword
	Sec 1	System
	Sec 2 PFD
	Sec 3	MFD
Sec 4	Hazard	Avoidance
Sec 5	Additional	Features
Sec 6	Annun. & Alerts
	Sec 7	Symbols
	Sec 8	Glossary

•GPS is the bearing source and an active waypoint is not selected

•ADF is selected and a signal is not received (if you have an ADF that supports a valid flag then the bearing pointer will be removed. If your ADF system does not include a valid flag then the bearing pointer will still be displayed, regardless of ADF signal validity.)

Bearing 2 Pointer								GPS Level
Current Navigation Source								of Service
	CDI							Bearing 1 Pointer
Bearing 1 Source								Bearing 2 Source
			Bearing 1				Bearing 2
			Pointer Icon			Pointer Icon
	Figure 2-35 HSI with Bearing Information
								OCN
								ENR
								TERM
GPS1								APR
								LNAV
GPS2
								LNAV+V
VOR1
								LPV
VOR2
								LNAV/VNAV
LOC1			CDI Source		GPS Mode
								LP
LOC2
MSG		GPS Advisory			Suspend			OBS
LOI				LOI				SUSP

Appendix B Index Appendix A

Figure 2-36 PFD HSI Annunciations

1)Press the PFD soft key to display the navigation source keys.

2)Press the BRG 1 or BRG 2 soft keys to toggle between the available Nav receivers of the selected source (such as: GPS, NAV, or ADF).

NOTE: The Bearing Line for navigation source 1 (BRG1) will be a single line. The Bearing Line for navigation source 2 (BRG2) will be a double line.

2-28 Garmin G600 Pilot’s Guide 190-00601-02 Rev. E