Escient AVX user manual Installing the ETP Touch Panel

INSTALLING THE ETP TOUCH PANEL

The optional Escient Touch Panel is an external 15” flat LCD color display that offers full control of a FireBall via it’s integrated touch sensitive surface.

Follow these steps to connect the ETP-1500 to a FireBall:

1.Place the FireBall into Standby.

2.Connect the RS-232 serial cable to COM PORT 6 on the rear panel of your FireBall.

3.Connect the other end of the RS-232 serial cable to the bottom of the ETP-1500.

4.Connect one end of an S-Video cable to FireBall’s S-Video output.

5.Connect the other end of the S-Video cable to the S-Video input on bottom the ETP-1500.

6.Connect the ETP-1500 to an AC power source.

7.Press the power button on the front panel of the ETP-1500. The LED will turn amber.

8.Power on the FireBall, the LED on the touch panel will turn green.

The ETP-1500 will automatically be detected on the highest numbered COM PORT and the user interface will display the touch panel buttons around the perimeter of the screen.

PAGE 108

FireBall™ AVX & MX Series User’s Manual