RuggedCom RX1100, RX1000 manual Configuring Networking, Network Configuration

Chapter 4 – Configuring Networking

Chapter 4 – Configuring Networking

Introduction

This chapter familiarizes the user with:

∙Configuring Routing and Gateways

∙Configuring DNS

∙Entering host addresses

∙Configuring a pair of End To End Backup Interfaces

∙Viewing Routing Tables

Network Configuration

Figure 32: Network Configuration Menu

This menu allows you to configure IP networking parameters.

Select the Core Settings icon to configure kernel networking settings such as antispoofing and syncookies filtering.

Select the Dummy Interface in order to to assign an IP Address to the router that is independent of its interfaces.

Select the Routing and Default Route icon to assign a gateway address. Select the Static Multicast Routing icon to configure static multicast routes. Select the DNS Client icon to point the router at a DNS server.

Select the Host Addresses icon to locally configure IP address-hostname mappings. Select the End To End Backup icon to configure an end to end backup connection. Select the Current Routing & Interface Table icon to view the routing table.

The Apply Configuration button serves to restore the permanently saved changes and restart Ethernet networking.

RuggedCom 49