Options for Configuring the IP Address and Mask

Options

The Digi One/PortServer TS 2/4 IP address can be configured using the following methods:

With Digi Port Authority-Remote, a Digi utility

By updating the ARP table on a server and then pinging the Digi device (called Ping-ARP)

From the command line using the set config command

Using a RARP server

Using a DHCP server

The IP address and mask can also be changed using the web interface. This method, however, does not work for the initial IP address configuration.

Devices That Support DPA-Remote and Ping-ARP for IP Address Configuration

Not all Digi devices can use DPA-Remote and Ping-ARP for IP address configuration. To determine if you can use these features, find the hardware label on your Digi device and then use the table below to determine whether this feature is available:

Device

Part Number

Revision Required

 

 

 

Digi One IA RealPort

50000764-01

F or higher

 

 

 

Digi One RealPort

50000723-01

J or higher

 

 

 

PortServer TS 2

50000723-02

J or higher

 

 

 

PortServer TS 4

50000723-03

G or higher

 

 

 

2-2

Options for Configuring the IP Address and Mask

Page 14
Image 14
Digi TS 4, TS 2/4 manual Options for Configuring the IP Address and Mask