Symptom: Digi One/PortServer TS 2/4 Does Not Boot
Introduction
Use the information provided in this discussion when Digi One/PortServer TS 2/4 will not complete the boot cycle.
Procedures
Things to Try | See ... | |
|
| |
| • "Running Digi One/PortServer TS 2/4 | |
Check for hardware problems. | Customer Diagnostics" on page | |
• "Key to Interpreting Digi One/PortServer | ||
| ||
| TS 2/4 LEDs" on page | |
|
| |
Check for TFTP problems if Digi | • "Verifying TFTP on a UNIX System" on | |
page | ||
One/PortServer TS 2/4 is booting | ||
• "Troubleshooting TFTP Problems" on | ||
from a TFTP host. | ||
page | ||
| ||
|
| |
Resetting the device to configura- | "Resetting Digi One/PortServer TS 2/4 Con- | |
tion defaults. | figuration to Defaults" on page | |
|
| |
If you cannot resolve the problem, | "Digi Contact Information" on page | |
contact Digi. | ||
| ||
|
|
Symptom: Digi One/PortServer TS 2/4 Does Not Boot |