Digi TS 4, TS 2/4 manual Terminal Server Configuration Using RealPort

Terminal Server Configuration Using RealPort

In this example, the Digi One/PortServer TS 2/4 is simply providing ports for the LAN-based host using RealPort. The configuration is exceedingly simple because port attributes are configured on the host itself.

Related Information

For more information on configuring:

•The Ethernet interface, see "Configuring the IP Address" on page 2-1

•RealPort, see "Configuring Ports for RealPort" on page 3-1

Illustration

Terminal

192.250.150.11

Modem

Printer

Configuration

set	config ip=192.250.150.11 submask=255.255.255.0	(1)
set	ports range=2-4 dev=rp	(2)

Configuration Notes

1.The set config command configures the internet address and mask for Digi One/PortServer TS 2/4 Ethernet interface.

2.The set ports command configures ports 2, 3, and 4 for Realport. This command specifies dev=rp, which is an appropriate device type for RealPort.

17-4 Terminal Server Configuration Using RealPort