RuggedCom RX1100, RX1000 manual Ports And Addresses, Change Help Server

Models: RX1000 RX1100

1 284
Download 284 pages 36.63 Kb
Page 41
Image 41

Chapter 2 – Webmin Configuration

If your router is being used on a completely private network, or IP access control is being provided by the firewall you may leave IP Access Control disabled. Select the Allow from all addresses field and Save.

If you wish to restrict access to a single address or subnet, select the Only allow from listed addresses field. Enter a single IP address or a subnetted address.

If you wish to deny access to a specific subnet, select the Deny from listed addresses field. Enter a single IP address or a subnetted address.

If DNS is configured you may allow and deny based upon hostname. Partially qualified domain names such as *.foo.com are acceptable.

The Resolve hostnames on every request field forces Webmin to perform a hostname lookup for every user access. The result of this will be that a dynamically assigned IP with a DNS entry with a Dynamic DNS registrar will be able to be checked against the IP Access Control list, just like a fixed address. This method is useful for administrators who travel or simply don't have a fixed address at their normal location.

Note: This is not efficient if you have more than a few domain names entered in the IP Access Control list, due to the high overhead of performing a name lookup for every hostname in the list on every request.

Ports And Addresses

Figure 17: Webmin Configuration Menu, Ports and Addresses

This command allows you to restrict access to Webmin from one particular network interface on your server. If your Webmin server has a non-routable local address and a routable Internet address, you should decide whether anyone will ever need to be able to access the Webmin server from outside of your local network. If not, simply configure Webmin to listen on the local interface.

By default, Webmin listens on TCP port 10000 for clients. It is possible to change this default behaviour.

Change Help Server

Figure 18: Webmin Configuration Menu, Change Help Server

RuggedCom

39

Page 41
Image 41
RuggedCom RX1100, RX1000 manual Ports And Addresses, Change Help Server