RuggedRouter™ User Guide

Networking

Figure 185: SSH Server Networking

The Listen on addresses fields determine an IP addresses and port upon which SSH will accept a connection.

The Listen on port field determines the port number SSH will listen on, assuming Listen on addresses is set to “All addresses”.

The Accept Protocols fields determine which versions of SSH will be allowed.

The Disconnect if client has crashed field determines whether the SSH server should periodically check to see if the client is still alive.

The Time to wait for login field determines the maximum time from a connection request until login completes, after which the client will be disconnected.

The Allow TCP forwarding field specifies whether TCP forwarding is permitted. If this option is set, clients on a remote network can tunnel TCP connections to machines on the RuggedRouter's network.

The Allow connection to forwarded ports field specifies whether remote hosts on the client network are allowed to connect to ports forwarded for the client.

Access Control

Figure 186: SSH Server Access Control

220

RuggedCom

Page 222
Image 222
RuggedCom RX1000, RX1100 manual Networking, Access Control