RuggedRouterâ„¢ User Guide

The Pack Char field configures the numeric value of the ASCII character which will force forwarding of accumulated data to the network. The Pack Char must be between 0 and 255 inclusive or the value off. If configured off, accumulated data will be forwarded based upon the packetization timeout parameter.

The Pack Timer field configures the delay from the last received character until when data is forwarded. The Pack Timer must be between 5 and 1000 milliseconds inclusive.

The Turnaround timer field controls the amount of delay (if any) to insert between the transmissions of individual messages out the serial port. The Pack Timer must be between 1 and 1000 milliseconds inclusive, of off.

The Call Dir field configures whether to accept an incoming connection, place an outgoing connection or do both.

The Max Conns field configures the maximum number of incoming connections to permit when the call direction is incoming.

The Remote IP field configures the address used when placing an outgoing connection.

The Remote Port field selects the TCP destination port used in outgoing connections.

The Local Port field selects the local TCP port to use to accept incoming connections.

190

RuggedCom

Page 192
Image 192
RuggedCom RX1000, RX1100 manual