Software Management
Manual Download of Configuration Files
The automated configuration management provided by the Twin Client Manager eliminates the need for manual terminal configuration. However, this function can be accomplished manually by clicking on Terminals and Send Configuration Files to Terminal. On the terminal, type “LD” at the DOS prompt, but do not Enter at this time.
Note: This procedure assumes that the PowerNet Twin Client was previously installed.
The following screen appears.
Choose Enter on the terminal while choosing OK at the prompt above. Boot the terminal. The terminal is now ready to begin a Telnet session with the new configuration files.
Under Terminal, you may select Receive File from Terminal.
Enter the path and file name to receive from the terminal in the Upload File dialog box.
The default file is “rf.log”. Click on OK.
Supported Equipment Manual • May, 2006 |
