Terminal Setup
Authorizing PowerNet
Each PowerNet Twin Client will run for 30 minutes at a time without authorization. Uninterrupted operation for a production environment is the result of authorizing the software.
The Twin Client Manager can automatically authorize the terminal over the wireless network if the following requirements are met:
•A PC running Twin Client Manager is connected to the wire LAN segment with at least one access point within range of the terminal.
•The System ID of the PC on which Twin Client Manager is installed has been used to obtain a site license Authorization code from the Connect web site.
To obtain the Twin Client Manager’s System ID, click on Authorization under Tools.
The Authorization window is displayed as shown below.
Supported Equipment Manual • May, 2006 |
