Wireless-G Broadband Router with 2 Phone Ports

AppendixC:FindingtheMACAddressandIPAddressforYour Ethernet Adapter

This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s Ethernet adapter. This IP address is used for the Router’s filtering, forwarding, and/or DMZ features. Follow the steps in this appendix to find the adapter’s MAC or IP address in Windows 98, Me, 2000, or XP.

Windows 98 or Me Instructions

1.Click Start and Run. In the Open field, enter winipcfg. Then press the Enter key or the OK button.

2.When the IP Configuration screen appears, select the Ethernet adapter you have connected to the Router via

a CAT 5 Ethernet network cable.

Figure C-1: IP Configuration Screen

3.Write down the Adapter Address as shown on your computer screen. This is the MAC address for your Ethernet adapter and is shown as a series of numbers and letters.

The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.

The example shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show something different.

Figure C-2: MAC/Adapter Address

Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter

85

Windows 98 or Me Instructions

Page 91
Image 91
Cisco Systems WRT54GP2 manual Windows 98 or Me Instructions, Figure C-1 IP Configuration Screen