Wireless-G Broadband Router with 2 Phone Ports

Voice QoS

This setting allows you to limit the outgoing bandwidth for the application- or port-based QoS policies in use, so you can control how much bandwidth a particular application is allowed to use.

Enable/Disable. To limit outgoing bandwidth for the QoS policies in use, select Enable. Otherwise, select

Disable.

QoS Upstream Rate. If you want the Router to automatically detect the QoS upstream rate, keep the default, Auto Detect. The rate will be automatically displayed. If you want to manually set the maximum QoS upstream rate, select Manual. Then enter the maximum speed in kbps; the default is 256 kbps.

When you have finished making changes to this screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. Help information is shown on the right-hand side of a screen. For additional information, click More.

44

Chapter 5: Configuring the Router

 

The Applications & Gaming Tab - QoS

Page 52
Image 52
Cisco Systems WRT54GP2 manual Voice QoS