Wireless-G Broadband Router with 2 Phone Ports

The Setup Tab - Basic Setup

The Basic Setup screen is the first screen you see when you access the Web-based Utility.

Internet Setup

The Internet Setup section configures the Router for your Internet connection type. This information can be obtained from your ISP.

Internet Connection Type

The Router supports six connection types: Obtain an IP automatically (DHCP), Static IP, PPPoE, RAS, PPTP, and Heart Beat Signal. Each Basic Setup screen and available features will differ depending on what kind of connection type you select.

Obtain an IP automatically

By default, the Router’s Internet Connection Type is set to Obtain an IP automatically, and it should be used only if your ISP supports DHCP or you are connecting through a dynamic IP address.

Figure 5-3: Setup Tab - Basic Setup

(Obtain an IP automatically)

Chapter 5: Configuring the Router

15

The Setup Tab - Basic Setup

Page 23
Image 23
Cisco Systems WRT54GP2 manual Setup Tab Basic Setup, Internet Setup, Internet Connection Type, Obtain an IP automatically