Samsung SLC460FWXAA, SL-C460FW/XAA manual Preprinted paper, Setting the paper size and type

Media and tray

Preprinted paper

When loading preprinted paper, the printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feeding, turn the paper around. Note that print quality is not guaranteed.

5

Setting the paper size and type

After loading paper in the paper tray, set the paper size and type using the control panel buttons.

•Must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine’s fusing temperature for 0.1 second (about 170°C (338°F)).

•Preprinted paper ink must be non-flammable and should not adversely affect machine rollers.

•Before you load preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality.

• The paper setting in the machine and driver should match to print without a paper mismatch error.

To change the paper setting set in the machine, from the Samsung Easy

Printer Manager select (Switch to advanced mode) > Device

Settings.

Or if your machine supports a display screen, you can set it using the

(Menu) button on the control panel.

Then, set the paper type from the Printing preferences window > Paper tab > Paper Type (see "Opening printing preferences" on page 54).

•It may be necessary to press OK to navigate to lower-level menus for some models.

1Select (Menu) button on the control panel.

2Press System Setup > Paper Setup > Paper Size or Paper Type.

3Select the tray and the option you want.

4Press OK to save the selection.

2. Menu Overview and Basic Setup 46