Samsung SLC460FWXAA Machine selects print, Paper source, Print job is extremely, Text is wrong

Printing problems

Condition	Possible cause	Suggested solutions
The machine does not	The machine may be configured incorrectly.	Check the Printing Preferences to ensure that all of the print settings are correct.
print.
	The printer driver may be incorrectly installed.	Uninstall and reinstall the machine’s driver.
	The machine is malfunctioning.	Check the display message on the control panel to see if the machine is indicating a
		system error. Contact a service representative.
	The document size is so big that the hard disk	Get more hard disk space and print the document again.
	space of the computer is insufficient to access the
	print job.
	The output tray is full.	Once the paper is removed from the output tray, the machine resumes printing.
The machine selects print	The paper option that was selected in the	For many software applications, the paper source selection is found under the Paper tab
materials from the wrong	Printing Preferences may be incorrect.	within the Printing Preferences (see "Opening printing preferences" on page 54).
paper source.		Select the correct paper source. See the printer driver help screen (see "Using help" on
		page 55).
A print job is extremely	The job may be very complex.	Reduce the complexity of the page or try adjusting the print quality settings.
slow.
Half the page is blank.	The page orientation setting may be incorrect.	Change the page orientation in your application (see "Opening printing preferences" on
		page 54). See the printer driver help screen (see "Using help" on page 55).
	The paper size and the paper size settings do not	Ensure that the paper size in the printer driver settings matches the paper in the tray.
	match.	Or, ensure that the paper size in the printer driver settings matches the paper selection
		in the software application settings you use (see "Opening printing preferences" on
		page 54).
The machine prints, but	The machine cable is loose or defective.	Disconnect the machine cable and reconnect. Try a print job that you have already
the text is wrong,		printed successfully. If possible, attach the cable and the machine to another computer
garbled, or incomplete.		that you know works and try a print job. Finally, try a new machine cable.

6. Troubleshooting 276