Samsung SL-C460FW manual Scanning from network connected machine, Select Scan to PC Settings menu

Scan features

1Open Samsung Easy Printer Manager (see "Using Samsung Easy Printer Manager" on page 262).

2Select the appropriate machine from the Printer List.

3Select Scan to PC Settings menu.

4Select the option you want.

•Scan Activation: Determines whether or not scanning is enabled on the device.

•Basic tab: Contains settings related to general scan and device settings.

•Image tab: Contains settings related to image altering.

5Press Save > OK.

Scanning from network connected machine

The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 23).

Make sure the printer driver is installed on your computer using the software CD, since the printer driver includes the scan program (see "Installing the driver locally" on page 29).

1Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on

page 48).

2Select (Scan) > Scan to PC > Network PC on the control panel.

If you see Not Available message, check the port connection.

3Select your registered computer ID, and enter the Password if necessary.

• ID is the same ID as the registered scan ID for Samsung Easy Printer

Manager > Switch to advanced mode > Scan to PC Settings.

•Password is the 4 digit number registered password for Samsung Easy

Printer Manager > Switch to advanced mode > Scan to PC

Settings.

4Select the option you want and press OK.

5Scanning begins.

4. Special Features 238