Samsung SL-C460FW/XAA, SLC460FWXAA manual Printing problems

Printing problems

Condition	Possible cause	Suggested solutions
The machine does not	The machine is not receiving power.	Connect the machine to the electricity supply first. If the machine has a	(Power/
print.
		Wakeup) button on the control, press it.
	The machine is not selected as the default	Select your machine as your default machine in Windows.
	machine.

Check the machine for the following:

•The cover is not closed. Close the cover.

•Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 100).

•No paper is loaded. Load paper (see "Loading paper in the tray" on page 41).

•The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 80).

•Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 80). If a system error occurs, contact your service representative.

The connection cable between the computer and	Disconnect the machine cable and reconnect it (see "Rear view" on page 23).
the machine is not connected properly.
The connection cable between the computer and	If possible, attach the cable to another computer that is working properly and print a job.
the machine is defective.	You can also try using a different machine cable.
The port setting is incorrect.	Check the Windows printer settings to make sure that the print job is sent to the correct
	port. If the computer has more than one port, make sure that the machine is attached to
	the correct one.

6. Troubleshooting 275