Samsung SL-C460FW/XAA, SLC460FWXAA manual Basic scanning, Basic Scanning

Basic scanning

For special scanning features, refer to the Advanced Guide (see "Scan features" on page 237).

If you see Not Available message, check the port connection, or select Enable Scan from Device Panel in Samsung Easy Printer Manager >

Switch to advanced mode > Scan to PC Settings.

Basic Scanning	3	Select the scan destination you want and press OK.
This is the normal and usual procedure for scanning originals.		Default setting is My Documents.
This is a basic scanning method for USB-connected machine.		• You can create and save the frequently used settings as a profile list. Also
		you can add and delete the profile and save each profile to a different
• It may be necessary to press OK to navigate to lower-level menus for		path.
some models.		• To change the Samsung Easy Printer Manager >	Switch to
• If you want to scan using the network, refer to the Advanced Guide (see		advanced mode > Scan to PC Settings.
"Scanning from network connected machine" on page 238).

1

2

Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 48).

C46xFW: Select (scan) > Scan to PC > Local PC on the control panel.

OR

C46xW: Press Scan to > Scan to PC > Local PC on the control panel.

4

5

Select the option you want and press OK.

Scanning begins.

Scanned image is saved in computer’s C:\Users\users name\My Documents. The saved folder may differ, depending on your operating system or the application you are using.

2. Menu Overview and Basic Setup 62