Samsung SL-C460FW/XAA, SLC460FWXAA manual Installing the driver locally, Windows, Accessories Run

Installing the driver locally

A locally connected machine is a machine directly attached to your computer	4 Follow the instructions in the installation window.
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see	You can select the software applications in the Select Software to Install
"Installing driver over the network" on page 149).
	Window.

• If you are a Mac or Linux operating systems user, refer to the "Installation for Mac" on page 140 or "Installation for Linux" on page 142.

•The installation window in this User’s Guide may differ depending on the machine and interface in use.

•Only use a USB cable no longer than 3 meters (118 inches).

Windows

1Insert the supplied software CD into your CD-ROM drive.

If the installation window does not appear, click Start > All programs >

Accessories > Run.

X:\Setup.exe replacing “X” with the letter, which represents your CD-

ROM drive and click OK.

2Review and accept the installation agreements in the installation window. Then, click Next.

3Select USB connection on the Printer Connection Type screen. Then, click Next.

1. Introduction 29