Samsung SLC460FWXAA, SL-C460FW Next, If the screen does not appear, go to step, WEP Key Index

Wireless network setup

11 If Wireless Settings screen appears, select Using a USB cable and click	• Authentication: Select an authentication type.
Next.	Open System: Authentication is not used, and encryption may or may
If the screen does not appear, go to step 15.	not be used, depending on the need for data security.
	Shared Key: Authentication is used. A device that has a proper WEP key
	can access the network.
	WPA Personal or WPA2 Personal: Select this option to authenticate the
	print server based on the WPA Pre-Shared Key. This uses a shared secret
	key (generally called Pre Shared Key pass phrase) that is manually
	configured on the access point and each of its clients.
	• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,
	TKIP, AES)
	• Network Password: Enter the encryption network password value.
	• Confirm Network Password: Confirm the encryption network
	password value.
	• WEP Key Index: If you are using WEP Encryption, select the appropriate
	WEP Key Index.
	The wireless network security window appears when the access point has
	security enabled.
	Enter the Network Password of the access point (or router).
12 After searching, the window shows the wireless network devices. Select	13 The window showing the wireless network setting appears. Check the
the name (SSID) of the access point you want to use and click Next.	settings and click Next.

When you set the wireless configuration manually, click Advanced Setting.

•Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive).

•Operation Mode: Select Infrastructure.

•Wi-Fi Direct option appears on the screen only if your printer supports this feature.

•Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see "Setting up Wi-Fi Direct" on page 183).

2. Using a Network-Connected Machine 174