Samsung SLC460FWXAA, SL-C460FW/XAA manual Operation Mode Select ad hoc

Wireless network setup

4Select Wireless network connection on the Printer Connection Type screen. Then, click Next.

5On the Are you setting up your printer for the first time? screen, select Yes, I will set up my printer's wireless network. Then, click Next.

If your printer is already connected on the network, select No, my printer is already connected to my network.

6Select Using a USB cable on the Select the Wireless Setup Method screen. Then, click Next.

7After searching the wireless networks, a list of wireless networks your machine has searched appears. Click Advanced Setting.

• Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive).

•Operation Mode: Select ad hoc.

•Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).

•Authentication: Select an authentication type.

Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.

Shared Key: Authentication is used. A device that has a proper WEP key can access the network.

•Encryption: Select the encryption (None, WEP64, WEP128).

•Network Password: Enter the encryption network password value.

•Confirm Network Password: Confirm the encryption network password value.

•WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index.

The wireless network security window appears when the ad hoc network has security enabled.

Select Open System or Shared Key for the authentication and click Next.

•WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key.

8The window showing the wireless network setting appears. Check the settings and click Next.

2. Using a Network-Connected Machine 171