Samsung SLC460FWXAA, SL-C460FW/XAA manual Setting eco mode on the driver, Eco options

Basic printing

Setting eco mode on the driver		• The actual amount displayed is only an estimate as the actual amount may
		differ depending on the operating system used, computing performance,
Open the Eco tab to set Eco mode. When you see the eco image (		application software, connection method, media type [thickness], media
	), that
means the eco mode is currently enabled.		size, job complexity, etc.

Eco options

•Printer Default: Follows the settings from the machine's control panel.

•None: Disables Eco mode.

•Eco Printing: Enables eco mode. Activate the various Eco items you want to use.

•Password: If the administrator fixed to enable the Eco mode, you have to enter the password to change the status.

Result simulator

Result Simulator shows the results of reduced emission of carbon dioxide, used electricity, and the amount of saved paper in accordance with the settings you selected.

•The results are calculated on the basis that the total number of printed paper is one hundred without a blank page when the Eco mode is disabled.

•Refers to the calculation coefficient about CO2, energy, and paper from IEA, the index of Ministry of Internal Affairs and Communication of Japan and www.remanufacturing.org.uk. Each model has a different index.

•The power consumption in printing mode refers to the average printing power consumption of this machine.

2. Menu Overview and Basic Setup 57