Samsung SL-C460FW/XAA, SLC460FWXAA Installing driver over the network, Silent installation Mode

Installing driver over the network

•Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7).

•The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 23).

•You can install the printer driver and software when you insert the software CD into your CD-ROM drive.

For windows, select the printer driver and software in the Select Software to Install window.

5Follow the instructions in the installation window.

Silent installation Mode

Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window.

	Command-line Parameters
	Following table shows commands that can be used in the command window.
Windows
	Following command-line are effective and operated when command is
The firewall software might be blocking network communication. Before
	used with /s or /S. But /h, /H or /? are exceptional commands that can be
connecting the device to the network, disable the computer’s firewall.	operated solely.

1Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see "Setting IP

address" on page 146).

2Insert the supplied software CD into your CD-ROM drive.

3Review and accept the installation agreements in the installation window. Then, click Next.

4Select Network Connection on the Printer Connection Type screen.

Command- line	Definition	Description
/s or	Starts silent installation.	Installs machine drivers
/S		without prompting any UIs
		or user intervention.

2. Using a Network-Connected Machine 149