Cisco Systems A9014CFD Extending QoS for Mlppp, Configuring Class-map for Matching Mpls EXP Bits

Chapter 24 Configuring QoS

Extending QoS for MLPPP

Extending QoS for MLPPP

•Configuring Class-map for Matching MPLS EXP Bits, page 24-64

•Configuring Class-map for Matching IP DSCP Value, page 24-65

•Configuring Class-map for Matching MPLS EXP Bits or IP DSCP Value, page 24-66

•Configuring a Policy-map, page 24-67

•Attaching the Policy-map to MLPPP Interface, page 24-70

•Re-marking IP DSCP Values of CPU Generated Traffic, page 24-72

•Re-marking MPLS EXP Values of CPU Generated Traffic, page 24-73

•Configuring a Policy-map to Match on CS5 and EXP4, page 24-74

•Attaching the Policy-map to Match on CS5 and EXP4 to MLPPP Interface, page 24-76

Configuring Class-map for Matching MPLS EXP Bits

Complete the following steps to configure class-map for matching MPLS experimental bits.

SUMMARY STEPS

1.enable

2.configure terminal

3.class-map match-any class-map-name

4.match mpls experimental topmost number

5.exit

DETAILED STEPS

	Command	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	class-map match-any class-map-name	Creates a class map to be used for matching packets to a specified class
		and to enter QoS class-map configuration mode:
	Example:	• class-map-name—Name of the class for the class map. The class
	Router(config)# class-map match-any	name is used for both the class map and to configure a policy for the
	mplsexp	class in the policy map.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
24-64	OL-23826-09