Cisco Systems A9014CFD manual 10-29

Chapter 10 Configuring Ethernet OAM

	Command	Purpose
Step 7
	service {ma-name ma-number vpn-id vpn} {vlan	Define a customer service maintenance association name
	vlan-id[direction down] port}	or number to be associated with the domain, or a VLAN ID
		or VPN-ID, and enter ethernet-cfm-service configuration
		mode.
		• ma-name—a string of no more than 100 characters that
		identifies the MAID.
		• ma-number—a value from 0 to 65535.
		• vpn-id—enter a VPN ID as the ma-name.
		• vlan vlan-id—VLAN range is from 1 to 4094. You
		cannot use the same VLAN ID for more than one
		domain at the same level.
		• (Optional) direction down—specify the service
		direction as down.
		• port—Configure port MEP, a down MEP that is
		untagged and not associated with a VLAN.
Step 8
	lck level level-id	(Optional) Configure the maintenance level for sending
		ETH-LCK frames sent by the MEP. The range is 0 to 7.
Step 9
	lck period value	(Optional) Configure the MEP ETH-LCK frame
		transmission period interval. Allowable values are 1 second
		or 60 seconds.
Step 10
	lck expiry-threshold value	(Optional) Set the expiring threshold for the MA. The
		range is 2 to 255. The default is 3.5.
Step 11
	exit	Return to ethernet-cfm configuration mode.
Step 12
	exit	Return to global configuration mode.
Step 13
	interface interface-id	Specify an interface ID, and enter interface configuration
		mode.
Step 14
	[no] ethernet cfm lck link-status	Enable or disable sending ETH-LCK frames from the
		SMEP on the interface.
Step 15
	ethernet cfm lck link-status period value	Configure the ETH-LCK transmission period generated by
		the SMEP on the interface. Allowable values are 1 second
		or 60 seconds.
Step 16
	ethernet cfm lck link-status level level-id	Configure the maintenance level for sending ETH-LCK
		frames sent by the SMEP on the interface. The range is 0 to
		7.
Step 17
	end	Return to privileged EXEC mode.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		10-29