Cisco Systems A9014CFD manual Verifying Named Access List, 24-55, Router# show access-lists tes456

Chapter 24 Configuring QoS

Configuring Quality of Service (QoS)

Slice allocated to: OAM, Ethernet loopback, Y.1731 DMM

Slice ID: 3

Stage: Ingress

Mode: Double

Entries used: 15/128

Slice allocated to: CESoPSN-UDP, CEF, Layer-3 Control Protocols

Slice ID: 8

Stage: Ingress

Mode: Double

Entries used: 220/256

Slice allocated to: Quality Of Service

Verifying Named Access List

To verify the standard or extended access list configuration, use the show access-listscommand as given below:

Router# show access-lists tes456

Extended IP access list tes456

10 permit ip host 10.1.1.1 192.168.1.0 0.0.0.255

20 permit ip host 10.1.1.1 192.168.2.0 0.0.0.255

30 permit ip host 10.1.1.1 192.168.3.0 0.0.0.255

40 permit ip host 10.1.1.1 192.168.4.0 0.0.0.255

50 permit ip host 10.1.1.1 192.168.5.0 0.0.0.255

60 permit ip host 10.1.1.1 192.168.6.0 0.0.0.255

70 permit ip host 10.1.1.1 192.168.7.0 0.0.0.255

80 permit ip host 10.1.1.1 192.168.8.0 0.0.0.255

90 permit ip host 10.1.1.1 192.168.9.0 0.0.0.255

!

!

!

To verify the ACL-based QoS classification, use the show policy-mapcommand as given below:

Router# show policy-map interface gigabitethernet 0/0

GigabitEthernet0/0

Service-policy input: test

Class-map: test (match-any)

0 packets, 244224 bytes

5 minute offered rate 6000 bps, drop rate 0000 bps Match: access-group name test

QoS Set dscp af32

Packets marked 0

No marking statistics available for this class

Class-map: class-default (match-any) 0 packets, 239168 bytes

5 minute offered rate 6000 bps, drop rate 0000 bps Match: any

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		24-55