Cisco Systems A9014CFD Configuring IS-IS for IPv6, Enable Configure terminal Router isis area-tag

Chapter 32 IPv6 Support on the Cisco ASR 901 Router

How to Configure IPv6 Support on the Cisco ASR 901 Router

3.interface type number

4.ipv6 ospf process-id area area-id [instance instance-id]

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	interface type number	Specifies an interface type and number, and places the
		router in interface configuration mode.
	Example:
	Router(config)# interface fastEthernet 0/0
Step 4
	ipv6 ospf process-idarea area-id[instance	Enables OSPFv3 on an interface.
	instance-id]	• process-id—Internal identification. It is locally
	Example:	assigned and can be any positive integer. The number
		used here is the number assigned administratively when
	Router(config-if)# ipv6 ospf 1 area 0	enabling the OSPFv3 routing process.
		• area-id—Area that is to be associated with the OSPFv3
		interface.
		• instance-id—(Optional) Instance identifier.

Configuring IS-IS for IPv6

SUMMARY STEPS

1.enable

2.configure terminal

3.router isis area-tag

4.net network-entity-tag

5.exit

6.interface type number

7.ipv6 address {ipv6-address/prefix-length prefix-name sub-bits/prefix-length}

8.ipv6 router isis area-name

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		32-19