SEH Computertechnik ISD300 How to use Point and Print with your PC client?

ISD300 User Manual
ISD300 User Manual
Managing Print Drivers
29
If no Windows driver has been stored on the ISD300, the ’Available
drivers’ box is empty. Print drivers can be assigned by
administrators only.
Proceed as follows:
1. Click SMB printing.
2. Click Windows drivers.
3. Select the queues.
4. Choose a driver from the ’Available drivers’ box.
5. Click Assign.
How to use ’Point and Print’ with your PC client?
The following step finalizes the ’point and print’ procedure. The
assigned printer drivers will be installed on the client.
Proceed as follows:
1. Click Run on the Windows start menu.
2. Enter the IP address of the ISD300.
Syntax: \\<IP address of the ISD300>
3. Click OK.
4. Select the required queue.
5. Click Connect on the File menu.
The printer driver will be installed on the PC client.