![](/images/new-backgrounds/1300596/30059687x1.webp)
ISD300 User Manual
Using ISD300 as DHCP / DNS Server
Using ISD300 as DHCP / DNS Server
The ISD300 comes with an integrated DHCP/DNS server. Compared with dedicated DHCP/DNS servers the ISD300 provides a limited set of features. It is designed for small networks without complex administrative structures.
What do you want to do?
•How to set the DHCP Service?
•How to display the lease file?
•How to set DNS Server?
•How to start/stop the DHCP or DNS Server?
How to set the DHCP Service?
DHCP (Dynamic Host Configuration Protocol) is an Internet protocol for automating the configuration of computers. DHCP can be used to automatically assign IP addresses, to deliver TCP/IP stack configuration parameters such as the subnet mask and default router, and to provide other configuration information.
DHCP service can be set by administrators only.
Proceed as follows:
1.Click DHCP & DNS.
2.Click Configure DHCP server.
3.Enter the IP address range; see: Parameter Settings - DHCP Server on page 45.
4.Enter the Fixed IP addresses; see: Parameter Settings - DHCP Server on page 45.
5.Enter the DHCP Options; see: Parameter Settings - DHCP Server on page 45.
6.Click Save.
After DHCP service is set, the server can be started; see: How to start/stop the DHCP or DNS Server? on page 48.
ISD300 User Manual | 44 |