ISD300 User Manual
Network Settings
4.Press 
to confirm.
ApplyBack appears in the display.
5.Press 
to confirm.
Upon booting DHCP will be applied automatically. TCP/IP parameters are assigned by a DHCP server.
Setting TCP/IP parameter via ISD300 Homepage
Proceed as follows:
1.Click Configuration.
2.Click TCP/IP.
3.Enter the TCP/IP paramter manually or enable the ’DHCP’ option; see Table: Parameter Settings - TCP/IP.
4.Click Set.
Table: Parameter Settings - TCP/IP
Parameter | Description |
|
|
IP address | IP address of the ISD300 (e.g. 192.168.0.21) |
|
|
Netmask | Netmask |
|
|
Gateway | IP address of the gateway used to access other |
| networks or subnets. This enables the ISD300 to |
| communicate with devices on other subnets. |
|
|
DHCP | Enable DHCP to set TCP/IP parameter via DHCP. |
| The TCP/IP parameters are assigned by a DHCP |
| server during the next reboot of the ISD300. |
|
|
How to set a Host Name?
You can set a host name for the ISD300. The host name and the IP address are displayed at the top left side of the browser window.
Proceed as follows:
1.Click Configuration.
2.Click Board Settings.
ISD300 User Manual | 15 |
