ADIC 601356 manual Specifies the name of the destination library

	Command Reference
Parameter	Descrition
-aarchivename	Specifies the name of the destination library
	for the media to be entered into after they are
	checked in.
	• Valid library names may contain up to 16
	alphanumeric characters, including spaces.
	• Leading and trailing spaces are not
	permitted.
-v	Indicates that verbose output is needed.
	Status is returned on every media specified in
	the vscheckout command.
	NOTE: If -vis not specified, status is returned
	on only those media that were not
	successfully checked out.
-I	Command options are first read from the
	command line. VolServ then reads any
	options contained in the stdin file.
-h	Requests help for the entered command.
	When the Help option is specified, no
	command line processing is performed.
	An exit code of 0 is returned to the client when
	the Help option is specified.
-Hhostname	Host name of the VolServ server. The default
	host name is the host name of the computer
	where the CLI command is run.
-Ppriority	The execution priority of the entered
Default value is	command. Assignable priority values are
	restricted to a range from 1 (highest) to 32
15.
	(lowest) inclusive.
-Rretries	Number of retries the CLI software attempts if
Default value is	a time-out is returned by the API software.
3.

Commands

601356 Rev A Command Reference 2-23