Command Reference
Step 2. Output returned:
Lock was unsuccessful
Error VOL122: not enough available drives in pool
Step 1. Unsuccessful Lock request.
Requests VolServ to lock (reserve for exclusive use) 1 drive from drive pool BadDrivePool.
vslock -p BadDrivePool -q 1
Step 2. Output returned:
Lock was unsuccessful
Error VOL030: invalid drive pool specified
Notes
Note
It is important to keep any vsmount or vsdismount request that contains the proper lock identifier to continue to have access to a locked drive.
If a mount request does not specify a lock identifier for a locked drive, whether the drive is available for use or not, the vsmount request waits until the drive is both unlocked and available.
Command Reference | 601356 Rev A |
